How to Clear Paper Jams on HP Color LaserJet 2600n

HP Color LaserJet 2600n is an affordable and compact laser printer known in the market for its compact-design and low-unit price but boasts of its printing capabilities that able to deliver excellent-quality printouts and photo-quality graphics, and it’s networking features via Ethernet connection for multiple users to be able to share the printer. It uses replacement laser toner cartridges, HP 2600 LaserJet toner cartridges: HP Q6000A black toner cartridge, HP Q6001A cyan toner cartridge, HP Q6002A yellow toner cartridge and HP Q6003A magenta toner cartridge.

And like any other laser printer in the market, the HP Color LaserJet 2600n is prone to the unavoidable laser printer problems such as paper jams like any other printers. For this article, we’re going to give you a step-by-step solution on how to fix paper jams problem in your HP Color LaserJet 2600n as given by HP Solutions:

How to Clear Paper Jams Inside Your HP Color LaserJet 2600n Printer

• Step 1 - Open the front cover of the printer.
• Step 2 - Carefully grasp the jammed paper by both corners and pull slowly to remove the paper.
• Close the front door.

Clearing Paper Jams from  Tray 2 or Optional Tray 2

• Step 1 - Pull Tray 2 or optional Tray 3 out of the printer.
• Step 2 - Carefully grasp the jammed paper by both corners and pull slowly to remove the paper.
• Step 3 - Slide the tray into the printer.
• Step 4 - Open and close the front door.

Clear Jams from the Top Bin

• Step 1 - Carefully grasp the jammed paper by both corners and pull slowly to remove the paper from the top bin.
• Step 2 - Open and close the front door.
• Step 3 - Occasionally, the fuser release lever must be opened to allow the paper to be removed. Note that the fuser release lever must be closed before the door will close completely.

Remember the paper jams problems usually occur inside the printer, in input areas such as the trays, in the output area and in the paper path. This problem is usually caused when either the input trays are loaded improperly or when the trays are opened during a print job. Paper jams can also occur when there are too many sheets accumulated in the output area or sheets blocked the output area. And as according to HP Solutions, it may also be caused by using any print media that does not meet with the HP specifications or when the environment in which the print media was stored is too humid or too dry.

Read More

Common Printer Problems and Their Solutions

photo credits from Warepin

This article is from Je Rust, a blogger friend from The Toner Expert.

Admit it or not, printers may have problem issues from time to time. Failures at most unexpected instances and technical difficulties that some average individuals find it hard to fix. Professionals are commonly used to this issues, but how about to non professionals who don’t have critical background when it comes to these problems associated to printers.

Here are some of the common HP printer problems that you may encounter, and to identify the root cause will somehow help you to think of the right solution if ever you run into these circumstances.

The most common printer problem of all is Paper jam.Various reason’s are to be consider when you encounter this problem. Inappropriate type or size of paper could the main cause, there might be folds to some corners of the paper that you didn’t notice before you load it to the tray, the roller that feeds the paper could also be a cause, but removing the roller is a tough job cause you need to disassemble the whole printer to access it. Whatever the cause may be, to deal with this problem you need to pull the paper out following the printers path direction. Forcing the paper to pull backwards can seriously damage the nozzles of cartridges and also your printer.

Another problem would be, the printer feeds a lot of papers from the tray instead of the normal single sheet. Possible causes are, the material you loaded was wet or damp, the pad the separates the papers when feeding from the tray was not functioning properly, the papers are to flatten too much that they stick with each other due to the process of manufacturing or long storage period. A very simple solution which i often do with this problem goes like this, before you load the papers hold a stack of it side by side then slightly fold them, then blow it from the top and see how each piece separates from the other.

Third problem, the prints are fading. It is normally a result of either the level of HP toners from your cartridges are getting low, or the printers setting is accidentally set to low density. Your solution will depend on what causes the problem, if you run out of ink or toner then buy a replacement hp toner cartridges or ink cartridges. If the problem is with the settings, you should know how to handle it since you can easily toggle the printers setting and try to explore which box should be check and un-check. Some printer models also have this called Econo-mode, which technically sets the printer to a low density.

A very unusual printer condition called ghosting is yet another issue. It is when you print normally but you’ll notice some faded marks and spots from the printed image where it as not intended. You can’t normally tell when or where it will occur, since graphical designs are often the cause of this condition. Occasionally it can be eliminated by changing the color sequence, the inks, the paper, changing to a press with a drier, or changing the printers rack.

Printing to paper sizes that are not included in the printers list, or envelope size materials. This problem often occurs to laser printers. Paper thickness should be consider to avoid this issue. Envelopes with adhesive should be avoided if possible since some adhesives can’t withstand the heat that laser printers emitted during the printing process thus the paper or the enveloped comes out with wrinkled parts.

Any equipment regardless of what brand you are using, you’ll always encounter problems. I hope this guide will give help to your printing problems, cause like you diagnosing and fixing technical problems is not that easy for me.

Je Rust, Guest Post Author
- is the owner and creator of The Toner Expert, which provides general information about the printing industry, tips and tricks of printing as well as the how-to's, basic solutions on your printing problems with your laser toner printer and inkjet printer.

Find him on Facebook, Twitter and Google+

for subscriptions you can subscribe on our RSS feed, join this Blog or Subscribe via e-mail below.

Read More