Fixing Print Cartridge Issues in HP LaserJet Enterprise 700 Printer M712

HP LaserJet Enterprise 700 Printer M712 is a high-volume black-and-white laser printer print up to 40 HP CF214A (HP 14A) Black Laser Toner Cartridge and HP CF214X (HP 14X) Black High Capacity Laser Toner Cartridge. The HP CF214A (HP 14A) Black Laser Toner Cartridge delivers a printing page yield of up to  1,500 pages at 5% coverage and the HP CF214X (HP 14X) Black High Capacity Laser Toner Cartridge produces a higher printing capacity of up to 2,500 pages at 5% coverage.

pages per minute and can deliver its first page out as fast as 10.5 seconds. It has a high printing resolution of 1200 x 1200 dpi and a high printing resolution of 100,000 pages, which supports Print Languages such as HP PCL 6, HP PCL 5e, HP Postscript 3 emulation and native PDF printing (v 1.4). It works with replacement printer cartridges,

If you’re having a problem regarding these print cartridges, then this article will provide you with the basic troubleshooting procedures that will help you to fix your problem. The following instructions and procedures are from HP’s own Support Website:

Printing When the Toner Cartridge is at Estimated End of Life

Once the toner cartridge is about to reach its limit, one of these two error message will pop out from your screen:

• <Supply> Low - This message displays when a supply is nearing the estimated end of its useful life.
• <Supply> Very Low - This message displays when a supply is at its estimated end of useful life. Print-quality problems can occur when using a supply that is at its estimated end of life.

When the error message that popped out is prompting you that the toner level is “low”, you can still continue printing by ignoring the error message or redistributing the toner powder inside the cartridge by taking it out of the printer and gently shaking it for a few times.

Check the Econo-Mode Setting

Econo-Mode when activated will turn your printouts lighter due to the fact that it orders your printer to use the minimal amount of toner powder in printing documents. To turn off the EconoMode, follow these steps:

• Step 1 - From the software program, select the Print option.
• Step 2 - Select the product, and then click the Properties or Preferences button.
• Step 3 - Click the Paper/Quality tab, and locate the Print Quality area.
• Step 4 - If the entire page is too dark, use these settings: (1) Select the 600 dpi option. (2) Select the EconoMode check box to enable it.
• Step 5 - If the entire page is too light, use these settings: (1) Select the FastRes 1200 option. (2) Clear the EconoMode check box to disable it.
• Step 6 - Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to print the job.