Tuesday, February 25, 2014

The HP Color LaserJet 2550N is a high performance digital laser printer that works with separate laser toner cartridges and drum cartridge. Its replacement printer cartridges, HP 2550 toner cartridges: HP Q3960A black toner, Q3961A cyan toner, Q3962A yellow toner and Q3963A magenta toner while for its replacement drum cartridge, it uses HP Q3964A (122A) Laser Drum Unit, as its printer consumable. And for today’s article, we’re going to discuss on how you can replace the drum unit in your HP Color LaserJet 2550N when it already reached the end of its installed life and appears to be worn out. By replacing the drum cartridge of your printer, it will most likely fixed and improve the quality of your printouts.


The following instructions below are from HP Support Center:
  • Step 1 - Open the top cover of the printer. Note that the printer should be turned on.
  • Step 2 - Remove the used imaging drum by pushing it away from you and lifting it out of the printer.
  • Step 3 - Locate the clear-plastic strip in the bottom of the opening. Wipe the strip with a soft, dry cloth to remove any dust or debris.
  • Step 4 - Remove the new imaging drum from the plastic bag, and place the used imaging drum in the bag for recycling.
  • Step 5 - Place the imaging drum on a firm surface and pull the orange rings to remove the shipping pins. Remove the orange-shipping lock on each end of the imaging drum.
  • Step 6 - Remove the two orange-shipping spacers.
  • Step 7 - Remove the orange cover from the imaging drum.
  • Step 8 - Align the white roller with the arrows inside the printer. Lower the imaging drum into the printer and press it firmly into place.
  • Step 9 - Close the top cover and press (GO) on the control panel. After a few seconds, the ready light will turn on. Installation is complete.

Once done, you can now install the cartridges back to your printer and wait for your machine to initialize the newly-installed drum cartridge. After this, you can now resume back to printing your documents. If you want to save money, you can always choose to use remanufactured HP Q3964A laser drum unit. This is an economical alternative printer consumable that is offered at a price lower than its OEM counterpart due to the fact that is recycled and has a lower production cost. However, it can deliver the same printing performance and page yield similar to OEM HP laser drum unit.

0 comments :

Post a Comment

Print your own comment / ideas now...

Design by Jel-Theme | Theme Designed by Jel - Custom Templates | Great Prints Solution
Flying Twitter Bird Widget By Trickstoo.com